ENTEL HT-649 GMDSS Portable VHF
HT649 Marine GMDSS VHF radio
Submersible to IP68 (5 metres for 1 hour)
The HT649 GMDSS portable is MED certified and carries the essential Wheel Mark logo.
For those requiring a full featured GMDSS portable, with high visibility back-lit LCD,
the HT649 is the most advanced GMDSS portable available.
 |
 |
You may choose from the following two packages:
Package 1:
- HT649 radio
- Primary battery (CLB750x)*
- High efficiency antenna
- User manual
Package 2:
- HT649 radio
- Primary battery (CLB750x)*
- Secondary battery (CNB750)
- Trickle charger (CCA230 / CCA110 / CCA12)
- High efficiency antenna
- User manual
* The GMDSS batteries (CLB750L \ G \ M depending on which cells have been used in the battery pack) are non-rechargeable Lithium batteries.
General Features
Entel is the first manufacturer to offer the superior IP68 specification, whereby we ourselves determine at what depth and for how long our equipment must remain waterproof. Not content with just the standard IP67 entry-level (1 metre for 30 minutes) Entel's IP68 HT series is certified as waterproof-submersible to an unprecedented depth of 5 metres for 60 minutes. Aware that the smallest tolerances of case size and material variation alone could compromise your radio's waterproof integrity, uniquely, each individual Entel portable is tested on a custom-built air pressure test-jig to ensure it meets the exacting high standards we have set for ourselves.
Meeting MIL-STD 810C/D/E/F commercial grade construction for tough, enduring performance, the Entel's HT and HX series 2.0 portables conform to stringent standards, enabling them to withstand the everyday rigours of shock, vibration and the corrosive effects of dust and moisture, ensuring many years of trouble free use in the most hostile environments.
All Entel portables come with the latest intelligent Lithium-Ion battery technology as standard. Whichever model you choose, these batteries will count the number of completed charge cycles, which on LCD variants, if dealer enabled, can be displayed when you power-on your radio. For your convenience it will even alert you to imminent battery life expiration. Another advantage of Lithium-Ion battery technology is the way it maximizes duty cycles, while the elimination of memory effect means there is no need to fully discharge the cells before recharging. Therefore you are assured a full duty cycle each and every time you take your radio from its charger.
Entel proposes to continuously add/upgrade features to its range of radios. Using Flash Upgrade technology your radios can be upgraded by your Dealer at any time.
The HTx44 and HTx49 models are supplied preprogrammed with all INT, USA and CAN channels.
A completely redesigned accessory connector, when secured to the portable, is designed to withstand any amount of punishment from dropping to careless misuse. Furthermore, the securing bolt incorporates a shearing point to protect the connector.
LCD display variants offer more information and versatility. For example, the entry level with LCD will display channel names, battery charge count, receive signal strength indicator etc.
The 7-key keypad gives you direct access to functions such as channel scanning, weather channels and channel 16.
Allows you to easily configure another radio to match your system.
When you do eventually use almost all the charge in your battery your radio will conveniently let you know it is time to change or recharge your battery.
When you attach a VOX enabled audio accessory you can operate totally hands free. All you need to do is talk and your Entel radio will automatically transmit for you.
Whichever model you choose, these batteries will count the number of completed charge cycles, which on LCD variants, if dealer enabled, can be displayed when you power-on your radio. For your convenience it will even alert you to imminent battery life expiration. If you opt for a system of non-display portables then we recommend that you have at least one model with a display in order to take advantage of this unique feature.
Speaks the channel number and basic settings so you can operate the radio without having to look at it.
Allows you to connect a Bluetooth audio or data accessory.
Accessories
Optionally the following accessories are available:
 |
CNB750E – Lithium-Ion battery pack for the HT series hand portable radio. The CNB750E is an 2000mAh Lithium-ion lightweight battery pack for the HT series of hand portable radios. The Lithium-ion technology gives the radio a long operating time and the batteries will not suffer from the ‘memory effect’ that can be experienced on radios using alternative battery chemistries. |
 |
CLB750G – GMDSS Battery Pack The CLB750G is a high capacity primary cell battery pack designed for the GMDSS portable range. |
 |
CSAHT – Single-unit rapid charger for the HT series hand portable. This intelligent rapid mains charger ensures that the battery only receives the correct amount of charge. Charge status is indicated via a multi-coloured LED so you will know whether the battery is fully charged before use. Charger operates between 110-230V. Due to the high capacity of the HT Li-Ion battery pack, charge time is around 2.5 hours. The charger can be either desk or wall mounted. |
 |
CSBHT - Six-unit multi rapid charger for the HT series hand portable radio. This six-unit intelligent rapid mains charger ensures that the batteries only receive the correct amount of charge. Charge status is indicated on each pod via a multi-coloured LED so you will know whether the battery is fully charged before use. Charger operates between 110-230V. Due to the high capacity of the HT Li-Ion battery pack, charge time is around 2.5 hours. |
.jpg) |
CCA230 - Single-unit regular charger for the HT series hand portable radio. Single-unit 230V mains regular charger for the HT series hand portable radio. Due to the high capacity of the HT Li-Ion battery pack, charge time is around 3.5 hours. The charger can be either desk or wall mounted. |
 |
CCA110 – Single–unit regular charger for the HT series hand portable radio. Single unit 110V mains regular charger for the HT series hand portable radio. Due to the high capacity of the HT Li–Ion battery pack, charge time is around 2-6 hours. The charger can be either desk or wall mounted. |
.jpg) |
CCA12 - 12V DC regular charger for the HT series hand portable. A charger pod and cigar lighter lead for regular charging of the HT series batteries from a 12V DC source. Due to the high capacity of the HT Li-Ion battery pack, charge time is around 3.5 hours. The charger can be either desk or wall mounted. |
 |
CWCHT-12 - Cigar lighter lead for the HT series hand portable. A spare cigar lighter lead for the CCA trickle charger pod. |
 |
CWC750 - Spare 3-pin mains adaptor, 230v |
 |
CBEHT - Dummy battery with regulator for 12v operation. Enables the radio to be powered from a vehicle/motorcycle battery etc |
 |
CMP1/750 - Pocket size lapel speaker microphone for the HT series hand portable radio. The CMP1/750 is attached with a revolving clip and allows the radio user to carry the radio on their belt and have the facility to both make and receive calls without removing their radio. This keeps the radio safe and ensures that calls are not missed, especially in noisy environments. The CMP1/750 has a socket (3.5mm mono) to allow an optional earpiece (EHP9) for discreet reception of calls. This accessory is designed for light to medium duty applications, so to ensure maximum life span it should be personally allocated to users. |
 |
CMP750 - A submersible, very rugged, heavy duty lapel speaker microphone for the HT series hand portable radio. The CMP750 is attached with a revolving clip and allows the radio user to carry the radio on their belt and have the facility to both make and receive calls without removing their radio. This keeps the radio safe and ensures that calls are not missed, especially in noisy environments. The CMP750 has a socket (3.5mm mono) to allow an optional earpiece (EHP9) for discreet reception of calls. Note: When the earpiece is attached the speaker microphone is no longer submersible, until the earpiece is removed and the waterproof cover is replaced and tightened. |
 |
EA12/750 – ‘D’ shaped earpiece and tie clip microphone for the HT series hand portable radio. A ‘D’ shaped, soft rubber-feel earpiece which fits over your ear. This is connected to a combined tie clip microphone and press to talk button via a curly cable. A rotating strain relief clip can attach to your collar to prevent the earpiece being dislodged if the cable were pulled. The EA12/750 allows the radio user to carry the radio on their belt and have the facility to both make and receive calls without removing their radio. This keeps the radio safe and ensures that calls are not missed, especially in noisy environments. This accessory is designed for light to medium duty applications, so to ensure maximum life span it should be personally allocated to users. |
 |
EA15/750 – Acoustic tube earpiece and tie clip microphone for the HT series hand portable radio. A clear acoustic tube earpiece which fits in your ear using the small or large soft pink ear plugs supplied. This is connected to a combined tie clip microphone and press to talk button (PTT). The EA15/750 allows the radio user to carry the radio on their belt and have the facility to both make and receive calls without removing their radio. This keeps the radio safe and ensures that calls are not missed, especially in noisy environments. This accessory is particularly suited to covert, security applications. This accessory is designed for light to medium duty applications, so to ensure maximum life span it should be personally allocated to users. |
 |
EA19/750 – ‘D’ shaped earpiece with boom microphone for the HT series hand portable radio. A ‘D’ shaped, soft rubber-feel earpiece which fits over your ear. The earpiece is combined with a lightweight short profile boom microphone. There is an in-line press to talk button (PTT) with clip. The EA19/750 allows the radio user to carry the radio on their belt and have the facility to both make and receive calls without removing their radio. This keeps the radio safe and ensures that calls are not missed, especially in noisy environments. This accessory is designed for light to medium duty applications, so to ensure maximum life span it should be personally allocated to users. |
 |
EPT40/750 - Bone conductive earpiece microphone for the HT series hand portable radio. The combined microphone/earpiece allows discreet communication with no visible microphone. The earpiece connects via a quality in line connector to a large rugged waterproof press to talk (PTT) button that can clip on to a belt or other suitable position using the rugged revolving clip. The press to talk switch is easy to use, has a positive feel and can be used by a gloved hand or under clothing. As with all bone conductive accessories, we do not recommend using voice operated transmit (VOX). |
 |
CXE19 Bone Conductive Headset CXE19 uses advanced bone conduction technology for both transmit and receive making this headset highly suitable for stealth applications. The benefit of bone conduction technology allows the user's ears to remain uncovered so they can be fully aware of their surroundings whilst wearing the headset. Lightweight and waterproof, CXE19 is suitable for a variety of applications, such as defence, security, fire and rescue. Salient features of the product are:
|
 |
CXR5/750 - Bone conductive skull microphone with in-line PTT for the HT series hand portable radio. A high quality rugged bone conductive compact helmet-com unit for professionals working in hazardous conditions. It has a dirt protected microphone and a single speaker and easily mounts into most helmet types and provides clear and hands-free communication. The headset attaches via a quality in-line connector to a large rugged waterproof press to talk switch that can clip on to a belt or other suitable position using the rugged revolving clip. The press to talk switch is easy to use, has a positive feel and can be used by a gloved hand or under clothing. As with all bone conductive accessories, we do not recommend using voice operated transmit (VOX). |
 |
CXR16/750 – ‘D’ Shaped earpiece, throat microphone with large in-line PTT for the HT series hand portable radio. A high quality throat microphone with a comfortable soft-feel adjustable neck band. A rugged ‘D’ shaped earpiece accompanies the throat microphone and connects via a quality in-line connector to a large rugged waterproof press to talk switch that can clip on to a belt or other suitable position using the rugged revolving clip. The large sized press to talk (PTT) switch is easy to use, has a positive feel and can be used by a gloved hand or under clothing. |
 |
CHP1/750 - Lightweight single earpiece headset with in-line PTT and VOX for the HT series hand portable radio. A ‘breeze’ style single earpiece wire-framed headset with boom microphone and wind cover. The headset has an in-line press to talk (PTT) button or the headset can be used with automatic voice activated transmit (when activated on the radio). The CHP1/750 allows the radio user to carry the radio on their belt and have the facility to both make and receive calls without removing their radio. This keeps the radio safe and ensures that calls are not missed, especially in noisy environments. This accessory is designed for light to medium duty applications, so to ensure maximum life span it should be personally allocated to users. |
 |
CHP750HS - Single earpiece ear defender (hard hat use only) with VOX for the HT series hand portable radio. A heavy duty single ear-cup earpiece with high quality noise-cancelling boom microphone and designed to connect to any safety hard hat via the supplied universal adapter. The headset provides both voice operated transmit (VOX) and a large easy-to-use press to talk button with spring-loaded clip, allowing the radio to be operated using a gloved hand or under clothing. We do stock a small range of common hard hat adapters which can be supplied in place of the universal adapter (please specify at time of ordering). |
 |
CHP750HD - Double ear-cup ear defender (hard hat use only) with VOX for the HT series hand portable radio. A heavy duty ear defender headset with high quality noise-cancelling boom microphone designed to connect to any safety hard hat via the supplied universal adapter. The headset provides both voice operated transmit and a large easy-to-use press to talk button with spring loaded clip, allowing the radio to be operated using a gloved hand or under clothing. We do stock a small range of common hard hat adapters which can be supplied in place of the universal adapter (please specify at time of ordering). |
 |
CHP750D - Double ear-cup ear defender with comfort headband and VOX for the HT series hand portable radio. A heavy duty ear defender headset with high quality noise-cancelling boom microphone and comfort headband. The headset provides both voice-activated transmit and a large easy-to-use press to talk (PTT) button with spring-loaded clip, allowing the radio to be operated using a gloved hand or under clothing. |
 |
EHP750 – D’ shaped covert style earpiece for the HT series hand portable radio. A ‘D’ shaped soft rubber-feel earpiece which fits over your ear. The earpiece is designed to connect into the HT series radio, via the locking accessory connector. This accessory is designed for light to medium duty applications, so to ensure maximum life span it should be personally allocated to users. |
 |
EHP9 - 'D' shaped covert style earpiece for the HT series hand portable radio. A ‘D’ shaped soft rubber-feel earpiece which fits over your ear. The earpiece is designed to connect into the CMP750 or CMP1/750 lapel speaker microphones. This accessory is designed for light to medium duty applications, so to ensure maximum life span it should be personally allocated to users. |
 |
CFC750 – Soft leather case with carry strap for the HT series hand portable radio. A soft lightweight carry case with belt-clip available in black. The case comes with a wrist lanyard offering the choice of carrying methods and gives the radio both cosmetic and some impact protection. |
 |
CLC753 – Heavy duty transparent case and strap for the HT series hand portable radio. A clear heavy duty carry case with belt loop and strap. This will give the radio cosmetic and impact protection if dropped or knocked. |
 |
CLC753 – Heavy duty transparent case and strap for the HT series hand portable radio. A clear heavy duty carry case with belt loop and strap. This will give the radio cosmetic and impact protection if dropped or knocked (with transparent flap). |
 |
CBH750 - Spare spring loaded belt clip |
 |
CXW750 - Antenna adaptor for external aerial connection |
| CAT40 – HT Series VHF marine standard antenna CSM750 – Service manual (Only available to Authorised Dealers) CPROGHT – Programming software & lead (Only available to Authorised Dealers) |
Tehnical Specification
| Frequency Range | 156 - 163.275MHz (HT649) |
| Channels | INT, USA, CAN |
| Channel Spacing | 25 kHz |
| Communication Method | Simplex / semi duplex |
| Antenna Impedance | 50 ohm |
| Antenna | Helical |
| Battery Type | 2000 mAh Li-Ion battery pack |
| Power Supply Voltage | 7.4V DC |
| Microphone | Internal condenser microphone |
| Operating Temperature | -20° to +55° |
| Weight | 277g with battery and aerial |
| Size (mm) | 59.5(W) x 130(H) x 37(D) W = 59.5 (62 including protrusions) H = 130 (145 inc knobs) D = 37mm (41 including battery protrusions) |
| Power Output | HIGH - 5W, LOW - 1W |
| Modulation | 16K0F3E |
| Frequency Stability | < ± 0.0002% (2PPM) |
| Maximum Deviation | ± 5 kHz |
| Audio Distortion | < 5% (1kHz 60%) |
| Spurious Emission | -68 [dBc] |
| Hum & Noise | -40 [dB] |
| Receiver Type | Double Super Heterodyne type |
| Sensitivity | < -0.25uV *12dB SINAD) |
| Frequency Stability | < ± 0.0002% (2PPM) |
| Spurious Rejection | -60 dB |
| Adjacent Channel Selectivity | -70 dB |
| Distortion | < 3% Typical |
| Hum & Noise | -40 dB |
| Audio Output | 1W |
| Speaker Size | 38 mm |